Publications:
CORC® wires allowing bending to 20 mm radius with 97.5% retention in critical current and having an engineering current density of 530 A mm-2 at 20 T
Laan van der, D.C., Supercond. Sci. Technol. 37, 115007, 2024
Performance of the 500 kW Superconducting DC and AC Links of the ASCEND Demonstrator at Airbus
Nilsson, E., IEEE Trans. Appl. Supercond. 34, 4801704, 2024
Calculation and Measurement of Transport AC Loss of ReBCO CORC Cables for Electric Aircraft
Otten, S., IEEE Trans. Appl. Supercond. 34, 4703605, 2024
Design of the Superconducting AC and DC Distribution for the ASCEND Demonstrator at Airbus
Nilsson, E., IEEE Trans. Appl. Supercond. 33, 5401006, 2023
Performance of low-loss demountable joints between CORC® cable-in-conduit-conductors at magnetic fields up to 8 T developed for fusion magnets
Weiss, J.D., Supercond. Sci. Technol. 36, 085002, 2023
Simulation for the Fault current Limiting Operation of REBCO CORC Superconducting Cables With Different Core Materials
Nguyen, L.N., IEEE Trans. Appl. Supercond. 33, 5600208, 2023
An Initial Look at the Magnetic Design of a 150 mm Aperture High-Temperature Superconducting Magnet With a Dipole Field of 8 to 10 T
Wang, X., IEEE Trans. Appl. Supercond. 33, 4000608, 2023
Distributed Fiber Optic Sensing to Identify Locations of Resistive Transitions in REBCO Conductors and Magnets
Luo, L., IEEE Trans. Appl. Supercond. 32, 9000906, 2022
Developing a Vacuum Pressure Impregnation Procedure for CORC Wires
Stern, J., IEEE Trans. Appl. Supercond. 32, 4800904, 2022
Prediction of strain, inter-layer interaction and critical current in CORC® wires under axial strain by T-A modeling
Wang, K., Supercond. Sci. Technol. 35, 105012, 2022
Current distribution monitoring enables quench and damage detection in superconducting fusion magnets
Teyber, R., Nature Scientific Reports 12, 22503, 2022
Critical Current Measurement of REBCO Cables by Using a Superconducting Transformer
Yu, H., IEEE Trans. Appl. Supercond. 32, 4800605, 2022
Ultrasonic Waveguides for Quench Detection in HTS Magnets
Marchevsky, M., IEEE Trans. Appl. Supercond. 32, 4701705, 2022
HTS Cable Conductor for Compact Fusion Tokamak Solenoids
Zhai, Y., IEEE Trans. Appl. Supercond. 32, 4203005, 2022
Numerical investigation of current distributions around defects in high temperature superconducting CORC® cables
Teyber, R., Supercond. Sci. Technol. 35, 094008, 2022
Investigations in the tape-to-tape contact resistance and contact composition in superconducting CORC® wires
Phifer, V., Supercond. Sci. Technol. 35, 065003, 2022
A turnkey gaseous helium-cooled superconducting CORC® dc power cable with integrated current leads
Laan van der, D.C., Supercond. Sci. Technol. 35, 065002, 2022
Enhanced critical axial tensile strain limit of CORC® wires: FEM and analytical modeling
Anvar, V.A., Supercond. Sci. Technol. 35, 055002, 2022
AC losses of Roebel and CORC® cables at higher AC magnetic fields and ramp rates
Sumption, M.D., Supercond. Sci. Technol. 35, 025006, 2022
High-temperature superconducting CORC® wires with record-breaking axial tensile tolerance present a breakthrough for high-field magnets
Laan van der, D.C., Supercond. Sci. Technol. 34, 10LT01, 2021
SMART conductor on round core (CORC®) wire via integrated optical fibers
Scurti, F., Supercond. Sci. Technol. 34, 035026, 2021
Superconductors for fusion: a roadmap
Mitchell, N., Supercond. Sci. Technol. 34, 103001, 2021
Conceptual design of HTS magnets for fusion nuclear science facility
Zhai, Y., Fusion Eng. and Design 168, 112611, 2021
Development and performance of a 2.9 Tesla dipole magnet using high-temperature superconducting CORC® wires
Wang, X., Supercond. Sci. Technol. 34, 015012, 2021
Quench detection using Hall sensors in high-temperature superconducting CORC®-based cable-in-conduit-conductors for fusion applications
Weiss, J.D., Supercond. Sci. Technol. 33, 105011, 2020
CORC® cable terminations with integrated Hall arrays for quench detection
Teyber, R., Supercond. Sci. Technol. 33 095009, 2020
CORC® wires containing integrated optical fibers for temperature and strain monitoring and voltage wires for reliable quench detection
Laan van der, D.C., Supercond. Sci. Technol. 33 085010, 2020
AC loss and contact resistance in REBCO CORC®, Roebel and stacked tape cables
Yagotintsev, Y., Supercond. Sci. Technol. 33, 085009, 2020
A CORC® cable insert solenoid: the first high-temperature superconducting insert magnet tested at currents exceeding 4 kA in 14 T background magnetic field
Laan van der, D.C., Supercond. Sci. Technol. 33, 05LT03, 2020
Recent Progress in the Development of CORC Cable-in-Conduit Conductors
Mulder, T., IEEE Trans. Appl. Sup. 30, 4800605, 2020
Introduction of the next generation of CORC® wires with engineering current density exceeding 650 A mm-2 at 12T based on SuperPower’s ReBCO tapes containing substrates of 25 µm thickness
Weiss, J.D., Supercond. Sci. Technol. 33, 044001, 2020
A 1.2T rated cos θ dipole magnet using high-temperature superconducting CORC® wires
Wang X., Supercond. Sci. Technol. 32, 075002, 2019
Effect of monotonic and cyclic axial tensile stress on the performance of superconducting CORC® wires
Laan van der, D.C., Supercond. Sci. Technol. 32, 054004, 2019
Hybrid superconducting fault current limiting CORC® wires with millisecond response time
Weiss, J.D., Supercond. Sci. Technol. 32, 034005, 2019
Status of CORC® cables and wires for use in high-field magnets and power systems a decade after their introduction
Laan van der, D.C., Supercond. Sci. Technol. 32, 033001, 2019
Effect of transverse compressive monotonic and cyclic loading on the performance of superconducting CORC® cables and wires
Laan van der, D.C., Supercond. Sci. Technol. 32, 015002, 2019
Bending of CORC® cables and wires: finite element parametric study and experimental validation
Anvar, V.A., Supercond. Sci. Technol. 31, 115006, 2018
Development of CORC® cables for helium gas cooled power transmission and fault current limiting applications
Laan van der, D.C., Supercond. Sci. Technol. 31, 085011, 2018
Development of ReBCO-CORC Wires With Current Densities of 400–600 A/mm2 at 10 T and 4.2 K
Mulder, T., IEEE Trans. Appl. Sup. 28, 4800504, 2018
A viable dipole magnet concept with REBCO CORC® wires and further development needs for high-field magnet applications
Wang X., Supercond. Sci. Technol. 31, 045007, 2018
Design and Preparation of Two ReBCO-CORC® Cable-In-Conduit Conductors for Fusion and Detector Magnets
Mulder, T., IOP Conf. Ser. Mat. Sci. Eng. 279, 012033, 2017
Introduction of CORC® wires: highly flexible, round high-temperature superconducting wires for magnet and power transmission applications
Weiss, J.D., Supercond. Sci. Technol. 30, 2017
Record current density of 344Amm-2 at 4.2K and 17T in CORC® accelerator magnet cables
Laan van der, D.C., Supercond. Sci. Technol. 29, 055009, 2016
Stability and normal zone propagation in YBCO CORC cables
Majoros M., Supercond. Sci Technol. 29, 044006, 2016
Behavior of a high-temperature superconducting conductor on a round core cable at current ramp rates as high as 67.8kAs-1 in background fields of up to 19T
Michael, P.C., Supercond. Sci. Technol. 29, 045003, 2016
Design and Manufacturing of a 45 kA at 10 T REBCO-CORC Cable-in-Conduit Conductor for Large-Scale Magnets
Mulder, T., IEEE Trans. Appl. Sup. 26, 4803605, 2016
Performance Test of an 8 kA @ 10-T 4.2-K ReBCO-CORC Cable
Mulder, T., IEEE Trans. Appl. Sup. 26, 4803705, 2016
Temperature- and field-dependent characterization of a conductor on round core cable
Barth, C., Supercond. Sci. Technol. 28, 2015
Engineering current density in excess of 200Amm-2 at 20T in CORC® magnet cables containing RE-Ba2Cu3O7-δ tapes with 38μm thick substrates
Laan van der, D.C., Supercond. Sci. Technol. 28, 2015
Optimized and practical electrical joints for CORC type HTS cables
Mulder, T., IOP Conf. Ser. Mat. Sci. Eng. 102, 012026, 2015
Magnetization ac loss reduction in HTS CORC® cables made of striated coated conductors
Vojenciak, M, Supercond. Sci. Technol. 28, 2015
Effect of variations in terminal contact resistances on the current distribution in high-temperature superconducting cables
Willering, G. P., Superconduct. Sci. Technol. 28, 2015
Characterization of a high-temperature superconducting conductor on round core cables in magnetic fields up to 20 T
Laan van der, D.C., Supercond. Sci. Technol. 26, 2013
High-current dc power transmission in flexible RE–Ba2Cu3O7-δ coated conductor cables
Laan van der, D.C., Supercond. Sci. Technol. 25, 2012
Compact GdBa2Cu3O7-δ coated conductor cables for electric power transmission and magnet applications
Laan van der, D.C., Supercond. Sci. Technol. 24, 2011
YBa2Cu3O7-δ coated conductor cabling for low ac-loss and high-field magnet applications
Laan van der, D.C., Supercond. Sci. Technol. 22, 2009